When the FAG bearing damage may lead to equipment is not expected to stop. Even stop every hour, because the FAG bearing early damage may cause huge production loss, especially in the capital intensive production.
Why would the bearing damage
FAG bearings are precision components, when in use requires a very cautious attitude, which is the use of bearing high performance, if used improperly, can not achieve the expected performance results, but also easy to make the bearing damage. So, should pay attention to the following items using bearing:
1, keep the FAG bearing and its surrounding environment clean
Even the naked eye cannot see smile dirt into the bearing, also increase the bearing wear, vibration and noise.
2, use the installation carefully
Do not allow powerful punch, does not allow a direct hit bearing with a hammer, not allowed to pass through the rolling pressure.
3, Installation tool appropriate use, accurate
As far as possible the use of special tools, to avoid the use of fabric and fiber or something.
4, to prevent the bearing corrosion
Direct hand when taking FAG bearings, to fully wash hands liquid, and coated with high quality mineral oil before operation, during the rainy season and summer with particular attention to rust.
However, in some special operating conditions, the bearing can have a longer life expectancy in traditional computing, especially in the light load conditions. These special operating conditions, when the rolling surface ( track and rolling ) is may cause surface damage effectively separated by a lubricant film and limit pollutants. In fact, in ideal conditions, the so-called permanent bearing life is possible.
Bearing quality:
With every FAG bearing users worry-free operation is the ultimate objective, we however, rely on the bearing quality is unable to guarantee the secure operation of other factors will affect the life, and each bearing, which includes:
Operating environment:
Machinery and equipment is to play to the best state. Bearings must be correctly on cardiac work and avoid extremely high temperature, humidity and pollution.
The correct installation:
With the correct installation technology and knowledge and the right tools, in order to ensure that the FAG bearing damage.
Proper maintenance:
Then the monitoring work proper lubrication and maintenance plan and bearing condition is also key to play FAG bearing the highest life expectancy.
Worry-free operation:
Worry-free operation concept is the target service is committed to the correct bearing and correct maintenance, is dangerous to stop because of bearing caused to a minimum, and to ensure the bearing to its full potential. The complete product and service can help you easy to installation and maintenance of bearings.
Bearing life
Life of a FAG bearing with rotation ( or speed of work under a certain number of hours ), definition: bearing within this life, should any of its bearing ring or a rolling body occurred on the initial fatigue damage ( spalling or defect ). However, whether in the laboratory or in actual use, can be clearly seen, the appearance of the same bearing under the same working conditions, the actual life is not the same. In addition to several different definitions of bearings "life ", one of the so-called "working life ", it represents the actual life of a bearing can be achieved in the damage before by the wear and tear, damage is usually caused not by fatigue, but by the wear, corrosion, seal damage and other causes.