The rolling bearing the regular inspection, to maintain the bearing in the best condition is very important work, can also reflect the problems found. About the matters should be paid attention to in the use of SKF bearings and related knowledge.
First of all, we want to emphasize is, keep rolling bearing lubrication and clean is very important. So when we check the bearing before, you should clean the bearing surface, and then remove the bearing parts around. We should pay attention to, is very fragile parts oil seal, so in check and disassembling require extra care, not excessive force, so as not to cause damage to parts. And then carefully check the bearing oil seal and its surrounding the parts, if have shown adverse symptoms, be sure to replace the bad oil seals, can cause bearing damage, stop the SKF bearing cloud properly caused equipment.
Secondly, we also check the rolling bearing lubricants. Lubrication is very important, not for bearings, bearings for all. But please note, bearing should not be adding too much grease.
Clean the bearings : general use gasoline, kerosene as a general cleaning agent. Remove bearing overhaul, the first recorded appearance of the bearings, confirmation of lubricant remaining quantity, sampling inspection after the use of lubricant and began to wash the SKF bearing. Cleaning rough cleaning and fine cleaning, placed in a container, put the metal net bottom, bearing no direct contact with the container.
1, rough cleaning, use the brush to remove grease, adhesive material, generally after a clean, to wash. If the SKF bearings with dirt rotation, will damage the rolling bearing surface, should pay attention to.
2, fine fine washing, cleaning of oil bearing is in the side of rotation, while careful cleaning. In addition, cleaning oil should be kept clean.
Rolling bearing maintenance and judgment: in order to determine whether removing SKF bearings can be used to inspect, clean in bearings.