1, in the use of non-standard bearings, regular cleaning is very important. How accurate cleaning non-standard bearings? First remove the bearings when the five, first with photography, good appearance record. In addition, to confirm that the remaining amount of lubricant and lubricant sampling, and then cleaning FAG bearings.
2, cleaning FAG bearings rough cleaning and washing suspension, and metal frame at the bottom of the container placed on the use of.
3, rough when washing, in oil use brushes Su Qingrun grease or adhesions. If the oil migration shift FAG bearings, note blend due to foreign bodies such as damage the rolling surface.
4, when sperm washing, slowly in the oil migration shift bearing, be hard to stop.
Cleaning agent 5, usually used for neutral without water diesel oil or oil, according to the demand and sometimes the use of temperature alkaline liquid. Regardless of the use of what kind of cleaning agents, are often filtered confrontation clean.
6, after cleaning, immediately in the non-standard bearings coated anti-rust oil or antirust grease.
FAG bearing the said defects, can not continue to use, should replace new bearing immediately. The details are as follows:
( 1 ) the inner ring, outer ring, rolling body, bearing cage there any cracks or gaps;
( 2 ) the bearing rings, rolling element fault on any one;
( 3 ) bearing raceway surface, rolling body wall, a marked card injuries;
( 4 ) shelf wear significantly maintain bearing, or rivet significant relaxation;
( 5 ) bearing raceway surface, rolling bodies have rust, injury;
( 6 ) bearing raceway surface, rolling body and playing a serious indentation marks;
( 7 ) the diameter of the inner ring or outer diameter surface of FAG bearing has the obvious creep;
( 8 ) due to thermal discoloration caused obvious.