Typically, the FAG bearing temperature as the bearing operation began slowly to rise, 1-2 hours to stabilize. FAG bearings normal temperatures due to the heat capacity of the machine, heat dissipation, speed and load another. If the lubrication, installation does not fit, the bearing temperature can rise dramatically, abnormal high temperature occurs, in which case you must stop and take the necessary precautions.
Using heat detector can always monitor FAG bearing temperature and temperature alarm when exceeding a specified value or stop to prevent burning shaft accident.
High temperature often indicates that the bearing is in an abnormal situation. High temperatures may also be harmful to the bearing lubricant. FAG bearings overheating sometimes can be attributed to the bearing lubricant. FAG bearings in more than 125 ℃ temperature long-term continuous transfers reduce the bearing life. Cause of the high temperature bearings including: inadequate or excessive lubrication lubrication, lubricant. Contains impurities, excessive load, rings of bearing damage, inadequate clearance, and oil have high friction and so on.
Bearing temperature monitoring is essential for the continuity of both measuring FAG bearing itself or other important parts. If operating conditions do not change case, any temperature changes may have occurred at fault.
FAG bearings temperature is measured using a thermometer on a regular basis, such as bearing a digital thermometer can accurately measure FAG bearing temperature in Celsius or Fahrenheit temperature displays.
The importance of FAG bearings, mean when their damage, will cause the device to shut down, so these bearings should preferably be retro-fitting of temperature probes.
Under normal circumstances, FAG bearing relubrication after the newly lubricated or will have natural temperatures to rise and stay one or two days.